Overhead Door- Model 610 Rolling Steel Service Door

Rolling Steel Service Doors 610

Rolling steel door model 610 is a perennial best-seller for good reason. The standard features exceed the norm for quality and a myriad of options allow for true customization. The Model 610 is built with a standard galvanized steel curtain, or an optional stainless steel or aluminum curtain. The standard curtain slat is the attractive C-187 curved profile, with additional slat options available in curved and flat. Finishes range from four standard colors to approximately 200 powder coat colors or matched to your specification. A host of other options — including motor operation, pass doors, exhaust ports, between-jambs mounting, cylinder locks and special usage packages — allow the 610 to be adapted to any environment.

Design Highlights

Standard max width – 30’4″ (9246 mm)
Standard max height – 28’4″ (8636 mm)
Curtain –
16 ga. galvanized steel up to 30’4″ (9246 mm) width (F-265 only)
18 ga. galvanized steel up to 30’4″ (9246 mm) width*
20 ga. galvanized steel up to 25’4″ (7722 mm) width*
22 ga. galvanized steel up to 18’4″ (5588 mm) width*
24 ga. galvanized steel up to 15’4″ (4674 mm) width*
* not all slat profiles
Finish –
Gray, tan, white or brown
Hood –
24 ga. galvanized steel
Wind load – 20 psf
Standard mounting – Face of wall
Operation –
Manual push-up up to 84 sq. ft. (7804 sq.mm) or 12′ x 7′ (3658 mm x 2134 mm)
Chain hoist over 84 sq. ft. (7804 sq.mm) or 12′ x 7′ (3658 mm x 2134 mm)
Standard springs – 20,000 cycle
Weatherseals – Bottom bar astragal
Guides –
Three structural steel angles PowderGuard^® weathered finish with black powder coat
Bottom bar –
Extruded aluminum with weatherseal up to 15’4″ (4674 mm)
Back-to-back steel angles with weatherseal more than 15’4″ (>4674 mm)
Lock –
Interior slide bolt on push-up
Padlockable chain keeper on chain hoist
Warranty –
24-month limited on door
3 year/20,000 cycles limited on door & operator system (when purchased together)
Slat profile –
STANDARD – CURVED

C-187 is standard up to 15’4″ (4877 mm) wide in 22 Gauge. Other gauge options available.

C-275 is option up to 15’4″ and standard for doors over 15’4″ wide (4877 mm). Gauge dependent on opening width. Fenestrations available in uniformly spaced openings of 5/8″ x 3″ (16 mm x 76 mm).
Perforation or fenestration options available for air and light infiltration available on 18 gauge primed steel only.

OPTION – FLAT

F-265 available up to 30’4” (9246 mm) wide in 18 gauge. Other gauges available. Fenestrations available in uniformly spaced openings of 5/8″ x 3″ (16 mm x 76 mm) or 1″ x 10″ (mm x mm). Perforation or fenestration options available for air and light infiltration available on 18 gauge primed steel only.

F-265E – 14 gauge extruded aluminum solid slat available up to 20’4” (6198 mm) width.
Perforation or fenestration not available on model 610 on F265E.

C-600 – For special applications requiring herculean size and strength, consider the 610 Series door with C-600 slats. This non-insulated, oversized door fits openings up to a maximum 1500 square feet (139.4 m2.), in widths up to 70′ (21,336 mm) and heights up to 30’4″ (9246 mm). The curtain is crafted with 6″ x 1 3/8″ (152 mm x 35 mm) curved, 18, 16 or 14-gauge steel slats for unparalleled strength and durability. No perforation or fenestration on model 610 on C-600.
Fenestration –

Curved slat with 3″ x 5/8″ fenestration

F265 slat with 10″ x 1″ fenestration

Door Options

Special application doors:
– Oversized doors to 1500 sq. ft. (139.4 sq. m)
– Combination doors with grilles and/or with full or partial standard, perforated or fenestrated slats
– Spark-resistant doors, craneway doors, pass doors
Electric operator (RHX^®, RSX^®, RMX^®) or crank operation
Bottom sensing edge
Sloping bottom bar
Between-jambs mounting
Stainless steel or aluminum slats
High-usage package
High-wind load (FBC, TDI, DADE)
Cylinder lock
Exhaust ports
Flat slat profile (F-265)
C-600 heavy duty 6″ curved slat profile
Perforated 18 ga. steel slats with 1/16″ (2 mm) diameter holes on 1/16″ (2 mm) centers
Fenestrated 18 ga. steel slats with uniformly spaced openings of 5/8″ x 3″ (16 mm x 76 mm) on C-275 or F265 slat profiles
Fenestrated 18 ga. steel slats with uniformly spaced openings of 1″ x 10″ (25.4 mm x 254 mm) on F265 slat profile
PowderGuard^® Premium powder coat finish options are available in approximately 200 colors as well as custom matching to specification.
PowderGuard^® Zinc and PowderGuard^® Weathered finishes

Colors

Standard Exterior Color

Actual door color may vary from the digital representation shown here. Actual color samples are available by request through your Overhead Door™ Distributor.

Brown
White
Gray
Tan

Powder Coat Color Options

PowderGuard^® Premium powder coat finish options are available in approximately 200 colors as well as custom matching to specification. PowderGuard^® Textured finish, a thicker, more scratch resistant coat, is available in 11 colors providing enhanced scratch resistance as well as aiding in hiding the dirt and blemishes that often occur in commercial environments.