Fireking 630 Series- Insulated Rolling Steel Fire Door

Fire-Rated Service Doors 630

These fire-rated rolling steel doors offer superior protection wherever a listed fire door is required. Common applications include factories, warehouses, mills, distribution centers and parking garages. Customized fire doors are available for conveyor openings. These doors feature fusible links mounted on both sides of the wall that separate to automatically close the door. UL recommends a 165º F (74º C) fuse link for ambient conditions for 100º F (38º C) or less, or a 212º F (100º C) fuse link for ambient conditions over 100º F (38º C).

Additional safety and protection features are available, including:Fire Sentinel^® time-delay release device, FireLite^® vision lites, smoke detectors, horns and strobes.

Fire-Rated Door 630 Mounting Chart

Slat selection and finishes
Fire door slats are available in curved or flat profile in either galvanized or stainless steel. Galvanized slats are finished with a rust-inhibitive, roll-coating process that incorporates baked-on prime paint, and a baked-on polyester top coat of gray, tan, white or brown. Stainless steel slats are manufactured with a No. 4 brushed finish.

Design Highlights

Standard max width – 41’2” (12548 mm)
Standard max height – 25’4” (7722 mm)
Curtain
Painted galvanized / stainless steel
Slat profile available in curved or flat.
Standard finish available in gray, tan, white or brown
Guides
Three structural steel angles.
PowderGuard^® Weathered finish with black powder coat.
Labels available for masonry or non-masonry applications –
UL/ULC 1-1/2 hr (FM is optional)
UL/ULC 3 hr (FM is optional)
UL oversized door (FM is optional)
Mechanical auto resettable hoist (non-motorized) –
Enables easy drop test and reset of fire door in seconds
Fusible link for added safety –
Separates at 165°F (74°C) to automatically close the door in case of fire
Fusible link for added safety –
Separates at 165°F (74°C) to automatically close the door in case of fire
Viscous governor technology –
Controls rate of door descent during a fire while reducing noise and vibration for quieter door operation
Innovative planetary gear design –
Ensures years of reliable service and drop-out performance
Warranty – 2-year material and workmanship
Fire doors are in compliance with:
National Fire Protection Association (NFPA-80)
Underwriters Laboratories (UL & ULC)
New York City (MEA)
State of California (CSFM)

Door Options

Factory Mutual (FM) label optional
PowderGuard^® Zinc and PowderGuard^® Weathered finishes
Operation: push-up, chain hoist, crank and electric motor (RHX^® or RSX^®)
Fire Sentinel^® time-delay release device
FireLite^® vision lites
UL-listed brush-type smoke seals
Flame baffle system (required for FM label)
Smoke detectors
Horns and horns with strobes
Cylinder locking bottom bar with mortise cylinder
Wind load (FBC, TDI, Miami-Dade)
PowderGuard^® Premium powder coat finish options are available in approximately 200 colors as well as custom matching to specification.

Colors

Actual door color may vary from the digital representation shown here. Actual color samples are available by request through your Overhead Door™ Distributor.

White
Brown
Gray
Tan

Powder Coat Color Options

PowderGuard^® Premium powder coat finish options are available in approximately 200 colors as well as custom matching to specification. PowderGuard^® Textured finish, a thicker, more scratch resistant coat, is available in 11 colors providing enhanced scratch resistance as well as aiding in hiding the dirt and blemishes that often occur in commercial environments.